1. Fully charge the rangefinder, using the USB-C cable included, for a minimum of 2 hours before using the rangefinder.
2. Look through the eyepiece and turn the focus dial clockwise or counterclockwise until the image is sharp.
3. Press the power button to turn on your Series 3 Max+. The display will turn off automatically when not in use.
4. Press the MODE button to select the Mode you need.
[SCAN] for continuous measuring
[GOLF] for golfing
5. Press and hold the MODE button for 2-3 seconds to change the measuring unit from Meters to Yards. (M/Y)
6. Aim the target through the cross on the display. Press and hold the start button to get a continuous reading as you move the rangefinder to scan the course.
[Applicable to SCAN mode]
7. Aim the target through the cross on the display. Press the start button once aligned with your target.
[Applicable to GOLF mode]
8. Press the RED / BLACK CONTROL button to switch between color modes